Shooting Correction Machine Assembly Instructions
This guide will walk you through the proper setup of the Shooting Correction Machine.
Please follow each step carefully to ensure safe use and optimal performance.
Before You Begin
Before assembling the machine, make sure you have:
- All components from both shipping boxes
- A clean, flat surface
- Adequate space for assembly
- Basic hand tools (if needed)
The Shooting Correction Machine is designed for quick and easy assembly.
Step 1: Unpack the Machine
- Carefully open both shipping boxes
- Remove all parts and lay them out on the floor
- Check that all components are included and undamaged
โ ๏ธ Do not discard packaging until assembly is complete.
Step 2: Assemble the Base Frame
- Position the base frame on a flat surface
- Ensure the non-marking wheels are facing the floor
- Secure all base connections firmly
The base is designed for stability while still allowing easy movement on gym floors.
Step 3: Install the Vertical Support
- Attach the vertical support arm to the base
- Tighten all fasteners securely
- Confirm the structure is stable and upright
At this stage, the machine should stand independently.
Step 4: Attach the Shooting Arm & 90ยฐ Arm Device
- Mount the shooting arm onto the vertical support
- Attach the 90ยฐ Arm Device to the shooting arm
- Adjust the arm device to the desired height
The arm device is reversible and can be used for both right-handed and left-handed shooters.
Step 5: Attach the Basketball
- A basketball is included as a gift with your purchase
- Any standard basketball may be used
To attach the basketball securely, please follow our dedicated guide:
๐ How to Attach the Basketball (Epoxy Instructions)
โ ๏ธ Allow proper curing time before use.
Step 6: Final Safety Check
Before training:
- Make sure all bolts and connections are tight
- Confirm the machine rolls smoothly and locks in position
- Ensure the basketball is securely attached
- Verify that the arm device moves freely without obstruction
Ready to Train
Once setup is complete, the Shooting Correction Machine is ready for use.
Start with controlled repetitions to become familiar with the motion. Focus on proper form, balance, and follow-through.
For best results, short and consistent training sessions are recommended.
Need Help?
If you have questions during setup or need assistance:
- Visit our FAQs section
- Or contact our support team directly
We are committed to providing long-term support for every machine we build at HoopsBasket.